GuitarModels/T-riple.scad

include <common.scad>
include <AluTCommon.scad>

semitone_strings = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "X", "XI"];
octave_strings = ["", ".", "..", "_"];
octave_scales = [1.1, 1, 0.9, 0.8];

z_resolution = $preview ? 0.5 : 0.1;
profile_arc_steps_backside = $preview ? 8 : 360;
profile_arc_steps_topside = $preview ? 8 : 60;

fret_width = 2.4; //2.8;  // Jumbo = 0.11", 0.055" tall
zero_fret_width = fret_width*1.5;
zero_fret_extra_height = 1.2;
fret_angle = 60; //Fret angle of 45° is normal, anything over 60 will not work correctly
tube_radius = Cap_Spine + T_circumcenter[0];
standard_profile_center_x = T_circumcenter[0];
x_min = standard_profile_center_x - tube_radius;
// minimum_y_width = 26.4517;
// standard_y_width = 28;

// Create a circle containing all 3 points, then plot the arc between the first two points
function arc_points(tri_points, fragments_per_mm=5) =
	let(
		cc = tri_circumcenter(tri_points),
		r = norm(tri_points[0] - cc),
		steps = ceil((norm(tri_points[2] - tri_points[0]) + norm(tri_points[2] - tri_points[1]))*fragments_per_mm),
		normalized0 = (tri_points[0] - cc)/r,
		normalized1 = (tri_points[1] - cc)/r,
		a_start = atan2(normalized0[1], normalized0[0]),
		a_end = atan2(normalized1[1], normalized1[0]),
		a_sweep = a_end - a_start,
		a_step = a_sweep/steps
	)
	[for (i = [0:steps]) r*[cos(a_start+i*a_step), sin(a_start+i*a_step)] + cc];


module fret_tube(from_fret, to_fret, scale_offset = 0, nut_spacing = 10, bridge_spacing = 20, strings = 3, y_width_extra_mm = 8, fingerboard_min_thick = 2.5, fingerboard_max_thick = 5, place_on_z0 = false, string_mms = false) {
	spacing_scale = bridge_spacing/nut_spacing;
	y_width_extra = y_width_extra_mm / ((strings-1) * nut_spacing);
	y_width_nut = ((strings-1) * nut_spacing) + y_width_extra_mm;
	y_width_bridge = ((strings-1) * bridge_spacing) + y_width_extra_mm;
	string_diameters = string_mms ? string_mms : [for (i=[1:strings]) 2];

	function fsl(fret_number) = fret_scale_length(fret_number + scale_offset);
	z0 = fsl(0);
	z_min = fsl(to_fret) - fret_width/2;
	z_max = fsl(from_fret) + zero_fret_width/2;
	Cap_Length = z_max - z_min;
	echo(str("Cap length from fret ", from_fret, " to ", to_fret, " is ", Cap_Length, "mm"));

	function get_desired_top_width(z) = lerp(y_width_bridge, y_width_nut, z/z0);
	function get_desired_profile_radius(top_width) =
		let (
			x = fingerboard_max_thick,
			cc = tri_circumcenter([[x, -top_width/2], [x, top_width/2], [x_min, 0]])
		)
		cc[0]-x_min;


	module solid_tube(cap_taper = 1.5) {
		function get_x_max(z) =
			let (
				fret_num = mm_to_fret_number(z)-scale_offset,
				nearest_fret = round(fret_num),
				nearest_fret_height = fingerboard_max_thick + ((nearest_fret == 0) ? zero_fret_extra_height : 0),
				nearest_fret_mm = fsl(nearest_fret)
			)
			z;
		module outline_xy(top_width, x_max = fingerboard_max_thick, rounding_radius = 1.5, backside = true, topside = true) {
			profile_radius = get_desired_profile_radius(top_width);
			profile_radius_scale = profile_radius / tube_radius;
			profile_center_x = (profile_radius_scale-1.0)*tube_radius + standard_profile_center_x;

			// Backside should join up relatively straight across the whole mesh
			a_backside_start = acos((-2-profile_center_x)/profile_radius);
			a_backside_end = 360 - a_backside_start;
			a_backside_step = (a_backside_end - a_backside_start)/profile_arc_steps_backside;
			// Frontside should have very detailed topology
			a_topside_start = acos((x_max-profile_center_x)/profile_radius);
			a_topside_end = 360 - a_topside_start;
			a_topside_step = (a_backside_start - a_topside_start)/profile_arc_steps_topside;

			function pt(a) = [profile_center_x + profile_radius*cos(a), profile_radius*sin(a)];
			backside_points = backside ? [for (i = [0:profile_arc_steps_backside]) pt(a_backside_start + i*a_backside_step)] : [];
			topside_points_1 = topside ? [for (i = [0:profile_arc_steps_topside]) pt(a_topside_start + i*a_topside_step)] : [];
			topside_points_2 = topside ? [for (i = [0:profile_arc_steps_topside]) pt(a_backside_end + i*a_topside_step)] : [];
			polygon(points = concat(topside_points_1, backside_points, topside_points_2));

			top_width_actual = pt(a_topside_start)[1] * 2;
			echo(TopWidthTarget=top_width, PScale=profile_radius_scale, r=profile_radius, TopWidth=top_width_actual, StringSpacing=(top_width-y_width_extra_mm)/(strings-1));
		}
		module fret_bumps(w=100) {
			translate([fingerboard_max_thick - fret_width/2, w/2, fsl(from_fret)])
				rotate([90,0,0]) cylinder(h = w, r = zero_fret_width/2, $fn=32);
			translate([fingerboard_max_thick - fret_width/2, w/2, 0])
				for (fret = [from_fret+1:to_fret])
					translate([0, 0, fsl(fret)])
						rotate([90,0,0]) cylinder(h = w, r = fret_width/2, $fn=32);
		}

		module scallops(w=100) {
			o = fret_width/2 * sin(fret_angle);
			y0 = fingerboard_min_thick;
			y1 = fingerboard_max_thick - (fret_width/2 * cos(fret_angle));
			rotate([-90,-90,0]) linear_extrude(height = w, center = true)
			for (fret = [from_fret+1:to_fret])
				let(
					x0 = fsl(fret-1) - o,
					x1 = fsl(fret) + o,
					x_mid = (x0+x1)/2,
					pts = [[x0, y1], [x1, y1], [x_mid, y0]],
					points = arc_points(pts)
				) {
					polygon(points);
				}
		}

		module basic_fretboard() {
			intersection() {
				hull() {
					translate([0,0,z_max]) linear_extrude(0.001) outline_xy(get_desired_top_width(z_max));
					translate([0,0,z_min]) linear_extrude(0.001) outline_xy(get_desired_top_width(z_min));
				}
				union() {
					color("black") fret_bumps();
					color("white", alpha=0.01) translate([-50,-50,z_min]) cube([50 + fingerboard_max_thick - (fret_width/2 * cos(fret_angle)), 100, Cap_Length]);
				}
			}
		}

		// Make a solid tube and then subtract the notches
		difference() {
			basic_fretboard();
			color("red") scallops();
		}
		// color("red") scallops();
	}

	module fret_number_text(fret) {
		octave = floor(fret/12);
		semitone = fret%12;
		octave_scale = octave_scales[octave];
		text(semitone_strings[semitone], size=4*octave_scale, halign="center", valign="center", font="Noto Sans", $fa=1, $fs=0.1);
		translate([0, 2.5])
			text(octave_strings[octave], size=5*octave_scale, halign="center", valign="center", font="Noto Sans", $fa=1, $fs=0.1);
	}

	module fret_number_markers(engrave_depth=1) {
		color("purple")
		// for (fret = [from_fret:to_fret])
		for (fret = [from_fret+1:to_fret]) {
			zn = fsl(fret);
			pr = get_desired_profile_radius(get_desired_top_width(zn));
			p_x0 = pr+x_min;
			translate([p_x0, 0, zn]) rotate([90,25,-asin((p_x0+2)/pr)])
				translate([0, 0, pr-engrave_depth]) linear_extrude(engrave_depth+1)
					fret_number_text(fret);
			translate([p_x0, 0, zn]) rotate([90,-25,180+asin((p_x0+2)/pr)])
				translate([0, 0, pr-engrave_depth]) linear_extrude(engrave_depth+1)
					fret_number_text(fret);
		}
	}

	translate([0, 0, place_on_z0 ? -z_min : 0])
	difference() {
		solid_tube(1.5);
		linear_extrude(z_max+1) T_hole();
		fret_number_markers();
		tapered_T_hole(z0 = z_min, z1 = z_min+3);
		tapered_T_hole(z0 = z_max-3, z1 = z_max+0.0001, o0 = 0, o1 = 1);
		// Version number
		translate([-10,10,z_max-0.5]) linear_extrude(1) text("06", size=5, halign="center", valign="center", font="Noto Sans");
	}

	color("silver")
	for (s = [0:strings-1]) {
		t = s - (strings/2) + 0.5;
		hull() {
			translate([fingerboard_max_thick+7, t*bridge_spacing, 0]) cylinder(h = 0.01, d = string_diameters[s], $fn=24);
			translate([fingerboard_max_thick+3, t*nut_spacing, fsl(0)]) cylinder(h = 0.01, d = string_diameters[s], $fn=24);
		}
	}
}

// Long Bass (34")
fret_tube(from_fret=0, to_fret=36, scale_offset=-5, nut_spacing=10, bridge_spacing=20, strings=3, string_mms=[2.54, 2.159, 1.651]);
// // Strat scale (25.5")
// translate([50, 0])
// fret_tube(from_fret=0, to_fret=30, scale_offset=0, nut_spacing=7, bridge_spacing=11, strings=6, string_mms=[0.8938, 0.8128, 0.6096, 0.4064, 0.2794, 0.2286]);
// // Smaller
// translate([100, 0])
// fret_tube(from_fret=0, to_fret=24, scale_offset=3, nut_spacing=7, bridge_spacing=11, strings=5, string_mms=[0.8938, 0.8128, 0.6096, 0.4064, 0.2794]);