GuitarModels/CFTubes.scad

include <common.scad>
// Guitar_Scale_Length_mm = 610;  // millimetres, slightly over 24inch (609.6mm) Jaguar scale, should be fine for guitar and u-bass
// assert(fret_scale_length(0) == 610);  // Make sure the function correctly uses our changed global

CF_Tube_Dia = 5.0;
CF_Square_Width = 6.0;

// Philippians 4:8
// Gideon 真実な, 尊ぶべき, 正しい, 清い, 愛すべき, 評判の良い, 徳とされる, 称賛に値する
// ShinKaiYaku65 最後に、兄弟たち。すべての真実なこと、すべての誉れあること、すべての正しいこと、すべてのきよいこと、すべての愛すべきこと、すべての評判の良いこと、そのほか徳と言われること、称賛に値することがあるならば、そのようなことに心を留めなさい。
// I swapped 愛 and 評判 because 12th fret should be the biggest marker, and having only 15 as a 2char marker would be too disorienting
// going with 良 for 21
fret_inlays = [[3, "真"], [5, "尊"], [7, "正"], [9, "清"], [12, "評判"], [15, "愛"], [17, "徳"], [19, "賛"], [21, "良"], [24, "主イエス"]];



module neck(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, num_frets=24, fret_width=2.4) {
	fw2 = fret_width/2;
	neck_length = fret_scale_length(0)+fw2;
	neck_width = (num_strings-1)*string_spacing + string_margin*2;
	module neck_stock() {
		angle_excess = asin((scallop_depth+fw2)/target_neck_thickness);
		a0 = 90-angle_excess;
		a1 = 270+angle_excess;
		rotate([-90, 0, 0])
			linear_extrude(neck_length)
			polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
	}
	module scallops() {
		for (fret = [0:num_frets]) {
			x0 = fret_scale_length(fret-1) - fw2;
			x1 = fret_scale_length(fret) + fw2;
			xmid = lerp(x0, x1, 0.5);
			// Radius it?
			arc = arc_points([[x0, scallop_depth], [x1, scallop_depth], [xmid, 0]]);
			// echo(arc);
			rotate([90, 0, 90]) linear_extrude(neck_width, center=true) polygon(arc);
		}
	}
	module fret_bumps() {
		for (fret = [0:num_frets]) {
			translate([0, fret_scale_length(fret), scallop_depth])
				rotate([0, 90]) cylinder(d=fret_width, h = neck_width, center = true, $fn=200);
		}
	}
	module fret_inlays() {
		for (num_text = fret_inlays) {
			fret = num_text[0];
			x0 = fret_scale_length(fret-1);
			x1 = fret_scale_length(fret);
			diff = x0 - x1;
			translate([0, lerp(x0, x1, 0.5), -0.5])
				linear_extrude(30)
				text(text = num_text[1], font = JP_Serif_Font, halign = "center", valign = "center", size = clamp(2, diff-fret_width*2-2, 10));
		}
	}
	module fret_side_markers() {
		for (num_text = fret_inlays) {
			fret = num_text[0];
			x0 = fret_scale_length(fret-1);
			x1 = fret_scale_length(fret);
			diff = x0 - x1;
			rotate([0, -90, 0])
				translate([0, x1, neck_width/2-3])
				linear_extrude(50)
				rotate(-35)
				text(text = str(fret), font = JP_Serif_Font, halign = "right", valign = "center", size = 5);
		}
	}
	// scallops();
	render() difference() {
		neck_stock();
		scallops();
		fret_inlays();
		fret_side_markers();
		translate([-neck_width, 0, scallop_depth]) cube([neck_width*2, Guitar_Scale_Length_mm*3, target_neck_thickness*3]);
	}
	intersection() {
		fret_bumps();
		neck_stock();
	}
}

module cf_tube(x1, x2, tolerance = 0.3) {
	translate([0, x2, 0])
		rotate([-90,0,0])
			cylinder(h=x1-x2, d=CF_Tube_Dia+tolerance, $fn=360);
	hull() {
		translate([0, x2])
			rotate([-90,0,0])
				cylinder(h=0.2, d=CF_Tube_Dia*1.2+tolerance, $fn=360);
		translate([0, x2+5])
			rotate([-90,0,0])
				cylinder(h=0.2, d=CF_Tube_Dia+tolerance, $fn=360);
	}
	hull() {
		translate([0, x1])
			rotate([-90,0,0])
				cylinder(h=0.2, d=CF_Tube_Dia*1.2+tolerance, $fn=360);
		translate([0, x1-5])
			rotate([-90,0,0])
				cylinder(h=0.2, d=CF_Tube_Dia+tolerance, $fn=360);
	}
}

module cf_square(x1, x2, tolerance = 0.2, taper_x1 = true, taper_x2 = true) {
	x = CF_Square_Width+tolerance;
	translate([-x/2, x2, -x/2])
	cube([x, x1-x2, x]);
	if (taper_x1) {
		hull() {
			translate([0, x1, 0])
				cube([x*1.2, 0.2, x*1.2], center=true);
			translate([0, x1-5, 0])
				cube([x, 0.2, x], center=true);
		}
	}
	if (taper_x2){
		hull() {
			translate([0, x2, 0])
				cube([x*1.2, 0.2, x*1.2], center=true);
			translate([0, x2+5, 0])
				cube([x, 0.2, x], center=true);
		}
	}
}

module fret_tube(from_fret, to_fret, fret_width=2.4) {
	fw2 = fret_width/2;
	x0 = fret_scale_length(0)+fw2;
	x1 = fret_scale_length(from_fret) + ((from_fret==0) ? fw2 : (-fw2));
	x2 = fret_scale_length(to_fret)-fw2;
	render() difference() {
		neck(fret_width=fret_width);
		for (i = [-1:2:1])
			translate([i*15, 0, -4])
			cf_tube(x1, x2);
		for (i = [-1:2:1])
			translate([i*7.5, 0, -7])
			cf_square(x1, x2);
		translate([0, 0, -10])
			cf_tube(x1, x2);

		translate([-50, 0, -50]) cube([100, x2, 100]);
		translate([-50, x1, -50]) cube([100, x0-x1, 100]);

		// αβγδεζ
		rotate([90, 0, 0]) linear_extrude((x2+0.3)*2, center=true)  text(text = "01β", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
	}
}

module headpiece(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4) {
	headpiece_length = 36;
	cf_square_length = 32;
	fw2 = fret_width/2;
	x0 = fret_scale_length(0)+fw2;
	neck_width = (num_strings-1)*string_spacing + string_margin*2;
	bend_radius = 24;

	module stock() {
		angle_excess = asin(scallop_depth/target_neck_thickness);
		a0 = 90-angle_excess;
		a1 = 270+angle_excess;
		translate([0, x0, 0])
			rotate([-90, 0, 0])
				linear_extrude(headpiece_length)
				polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
	}
	module string_tubes(tolerance = 1.0) {
		string_thicknesses = [4.9, 4.2, 3.0];
		module string_tube(diameter, fn=36) {
			hole_r = diameter/2;
			bend_r = bend_radius + hole_r;
			union() {
				for (a = [0:89]) {
					hull() {
						translate([0, bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
						translate([0, bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
					}
				}
				hull() {
					translate([0, bend_r*sin(90), bend_r*cos(90)]) sphere(hole_r, $fn=fn);
					translate([0, bend_r*sin(90), -target_neck_thickness]) sphere(hole_r, $fn=fn);
				}
			}
		};
		for (i = [0:num_strings-1]) {
			string_diameter = string_thicknesses[i] + tolerance;
			x = -neck_width/2 + string_margin + (i*string_spacing);
			translate([x, x0+2, -bend_radius+scallop_depth]) string_tube(string_diameter);
		}
	}
	difference() {
		stock();
		string_tubes();
		for (i = [-1:2:1])
			translate([i*7.5, 0, -7])
				cf_square(x0+cf_square_length, x0, taper_x1=false);
		// αβγδεζ
		translate([0, x0+headpiece_length, -5]) rotate([90, 0, 180]) linear_extrude(0.3, center=true)  text(text = "01β.γ", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
	}
}

echo(fret_scale_length(0) - fret_scale_length(8));  // 225.724
echo(fret_scale_length(8) - fret_scale_length(24));  // 240.335
// fret_tube(0, 8);
// //translate([30, 0, 0])
// fret_tube(8, 24);

// headpiece();
include <UBassTuner.scad>
UBassTuner();