diff --git a/T-riple.scad b/T-riple.scad
index a06351e..7003de4 100644
--- a/T-riple.scad
+++ b/T-riple.scad
@@ -6,14 +6,10 @@ octave_strings = ["", "˙", "¨", "¯"];
 octave_scales = [1.1, 1, 0.9, 0.8];
 
 z_resolution = $preview ? 0.5 : 0.1;
-profile_arc_steps_backside = $preview ? 8 : 180;
-profile_arc_steps_topside = $preview ? 8 : 20;
-// $fn = $preview ? 32 : 512;
-// mink_fn = $preview ? 12 : 128;
-// mink_fn_2d = $preview ? 32 : 256;
-// $fn = 32;
-// mink_fn = 12;
-// mink_fn_2d = 32;
+$fs = $preview ? 1 : 0.01;
+$fa = $preview ? 5 : 0.1;
+profile_arc_steps_backside = $preview ? 8 : 360;
+profile_arc_steps_topside = $preview ? 8 : 60;
 
 fret_width = 2.4; //2.8;  // Jumbo = 0.11", 0.055" tall
 zero_fret_width = fret_width*1.5;
@@ -22,13 +18,17 @@ fret_angle = 60; //Fret angle of 45° is normal, anything over 60 will not work
 tube_radius = Cap_Spine + T_circumcenter[0];
 standard_profile_center_x = T_circumcenter[0];
 x_min = standard_profile_center_x - tube_radius;
-standard_y_width = 26.4517;
-
+minimum_y_width = 26.4517;
+standard_y_width = 28;
+nut_spacing = 10;
+bridge_spacing = 20;
+y_width_extra_mm = standard_y_width - (2 * nut_spacing);
+y_width_extra = y_width_extra_mm / (2 * nut_spacing);
 
 module tube(from_fret, to_fret, scale_offset = 0, fingerboard_min_thick = 2.5, fingerboard_max_thick = 5) {
 	function fsl(fret_number) = fret_scale_length(fret_number + scale_offset);
 	z0 = fsl(0);
-	function get_desired_width_scale(z) = 2.0-(z/z0);
+	function get_desired_width_scale(z) = let (spacing = 2.0-(z/z0)) (spacing + y_width_extra)/(1 + y_width_extra);
 	function get_desired_profile_radius(ws) =
 		let (
 			x = fingerboard_max_thick,
@@ -73,7 +73,7 @@ module tube(from_fret, to_fret, scale_offset = 0, fingerboard_min_thick = 2.5, f
 			polygon(points = concat(topside_points_1, backside_points, topside_points_2));
 
 			top_width = pt(a_topside_start)[1] * 2;
-			echo(str("WScale=", width_scale, " PScale=", profile_radius_scale, " r=", profile_radius, " has top width of ", top_width, " divides to ", top_width/width_scale, " (goal is 26.4517)"));
+			echo(WScale=width_scale, PScale=profile_radius_scale, r=profile_radius, TopWidth=top_width, StringSpacing=(top_width-y_width_extra_mm)/2, dv=top_width/width_scale, goal=standard_y_width);
 		}
 		module fret_bumps(w=100) {
 			translate([fingerboard_max_thick - fret_width/2, w/2, -z_offset + fsl(from_fret)])
@@ -101,7 +101,7 @@ module tube(from_fret, to_fret, scale_offset = 0, fingerboard_min_thick = 2.5, f
 				) {
 					translate([0,-w/2,0]) 
 					rotate([-90,-90,0])
-					translate(cc) cylinder(h = w, r = r);
+					translate(cc) cylinder(h = w, r = r, $fn=max(8*ceil(r), 32));
 				}
 		}