diff --git a/CFTubes.scad b/CFTubes.scad
index 8c983e3..7246853 100644
--- a/CFTubes.scad
+++ b/CFTubes.scad
@@ -94,10 +94,10 @@ module neck(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thi
 	}
 }
 
-module bridge(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4*6) {
+module tailpiece(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4*6) {
 	fw2 = fret_width/2;
-	neck_length = 120;
-	neck_width = (num_strings-1)*string_spacing + string_margin*2;
+	neck_length = 88;
+	neck_width = (num_strings-1)*string_spacing + string_margin*2 + 6;
 	module neck_stock() {
 		angle_excess = asin((scallop_depth+fw2)/target_neck_thickness);
 		a0 = 90-angle_excess;
@@ -120,18 +120,32 @@ module bridge(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_t
 	}
 
 	module differences() {
-		t_offset = 2.7;
-		t_z = -23;
-		mirror([1,0,0]) translate([t_offset, 80, t_z]) rotate([90, -90, 90]) UBassTuner(from_below=false, from_side=true);
-						translate([t_offset, 45, t_z]) rotate([90, -90, 90]) UBassTuner(from_below=false, from_side=true);
-		mirror([1,0,0]) translate([t_offset, 10, t_z]) rotate([90, -90, 90]) UBassTuner(from_below=false, from_side=true);
+		t_offset = -27; //2.7;
+		t_z = -21; //-23;
+
+		module tuner() {
+			hole_r = 3;
+			bend_r = 24 + hole_r + 10;
+			fn=72;
+			rotate([90, -90, 90]) UBassTuner(from_below=true, from_side=true);
+			// translate([35,16,0]) cylinder(h=10-t_z, d=7, $fn=72);
+			translate([36-7,17,1]) for (a = [10:89]) {
+				hull() {
+					translate([a/9, bend_r-bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
+					translate([(a+1)/9, bend_r-bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
+				}
+			}
+		}
+		mirror([1,0,0]) translate([t_offset, 57, t_z]) tuner();
+						translate([t_offset, 31, t_z]) tuner();
+		mirror([1,0,0]) translate([t_offset,  5, t_z]) tuner();
 			for (i = [-1:2:1])
 				translate([i*15, 0, -4])
 				cf_tube(neck_length, 0, tolerance=0.4);
 			translate([0, 0, -10])
 				cf_tube(neck_length, 0, tolerance=0.4);
 	}
-	thick = 45;
+	thick = 32;
 	render() difference() {
 		color([1,1,1,0.3]) translate([-neck_width/2, 0, -thick+scallop_depth]) cube([neck_width, neck_length, thick]);
 		differences();
@@ -296,6 +310,70 @@ module headpiece(string_spacing=18, string_margin=4.5, num_strings=3, target_nec
 	}
 }
 
+module bridge(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4) {
+	piece_length = 16;
+	cf_square_length = 32;
+	fw2 = fret_width/2;
+	x0 = 0;
+	neck_width = (num_strings-1)*string_spacing + string_margin*2;
+	bend_radius = 24;
+	string_thicknesses = [4.9, 4.2, 3.0];
+
+	module stock() {
+		angle_excess = asin(scallop_depth/target_neck_thickness);
+		a0 = 90-angle_excess;
+		a1 = 270+angle_excess;
+		translate([0, x0, 0])
+			rotate([-90, 0, 0])
+				linear_extrude(piece_length)
+				polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
+		intersection() {
+			r = 14;
+			translate([0,8,scallop_depth]) rotate([18, -90, 0]) scale([1,0.2,1]) cylinder(r=r, h=neck_width*1.5, center=true, $fn=72);
+			a0 = -90;
+			a1 = 90;
+			translate([0, x0, 0])
+				rotate([-90, 0, 0])
+					linear_extrude(piece_length)
+					polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)*3]]);
+		}
+	}
+	module string_tubes(tolerance = 1.0) {
+		module string_tube(diameter, fn=36) {
+			hole_r = diameter/2;
+			bend_r = bend_radius + hole_r;
+			union() {
+				for (a = [0:89]) {
+					hull() {
+						translate([0, bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
+						translate([0, bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
+					}
+				}
+				hull() {
+					translate([0, bend_r*sin(90), bend_r*cos(90)]) sphere(hole_r, $fn=fn);
+					translate([0, bend_r*sin(90), -target_neck_thickness]) sphere(hole_r, $fn=fn);
+				}
+			}
+		};
+		for (i = [0:num_strings-1]) {
+			string_diameter = string_thicknesses[i] + tolerance;
+			x = -neck_width/2 + string_margin + (i*string_spacing);
+			// translate([x, x0+2, -bend_radius+scallop_depth]) string_tube(string_diameter);
+			translate([x, 0, scallop_depth+string_diameter/2+8]) rotate([-90,0,0]) cylinder(d=string_diameter, h=20, $fn=72);
+		}
+	}
+		// string_tubes();
+	difference() {
+		stock();
+		string_tubes();
+		for (i = [-1:1])
+			translate([i*15, 0, (i==0)?(-10):(-4)])
+				cf_tube(piece_length+0.1, x0-0.1, VLH=false);
+		// αβγδεζ
+		translate([0, x0+piece_length, -5]) rotate([90, 0, 180]) linear_extrude(0.3, center=true)  text(text = "01β", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
+	}
+}
+
 echo(fret_scale_length(0) - fret_scale_length(8));  // 225.724
 echo(fret_scale_length(8) - fret_scale_length(24));  // 240.335
 // fret_tube(0, 8);
@@ -306,4 +384,5 @@ echo(fret_scale_length(8) - fret_scale_length(24));  // 240.335
 // UBassTuner();
 
 // fret_tube_filler(24, 100);
-bridge();
+tailpiece();
+// bridge();