diff --git a/CFTubes.scad b/CFTubes.scad
index 36bb640..8a2c9f0 100644
--- a/CFTubes.scad
+++ b/CFTubes.scad
@@ -446,6 +446,6 @@ Guitar_Scale_Length_mm = Classical_Short_Scale_mm;
 // Nylon6String();
 
 difference() {
-	translate([-15, -60, 0]) cube([50, 120, 13]);
-	translate([0, 55, 8]) rotate([180,0,0]) NylonTuner();
+	translate([-15, -60, 0]) cube([50, 120, 8]);
+	translate([0, 55, 3]) rotate([180,0,0]) NylonTuner();
 }
\ No newline at end of file
diff --git a/NylonTuner.scad b/NylonTuner.scad
index 3eaae56..697fa45 100644
--- a/NylonTuner.scad
+++ b/NylonTuner.scad
@@ -3,15 +3,16 @@
 module NylonTuner() {
 	cyl_hd_fn = $preview ? 32 : 512;
 	cyl_ld_fn = $preview ? 24 : 72;
-	earshaft_diameter = 6;
-	ear_height = 13;
+	earshaft_diameter = 6.3;
+	ear_total_height = 22.5;
+	ear_height = 13+3;
 	ear_diameter = 22.1;
 	peg_diameter = 6.0;  // Closer to 5.7mm
 	peg_length = 28;
 	peg_spacing = 35.0;
 	peg_string_diameter = 2.2+0.1;
-	plate_width = 16.6 + 1.4;
-	plate_length = 111;
+	plate_width = 16.6 + 3.0;
+	plate_length = 112;
 	plate_thickness = 1.1;  // Not really used for our purposes
 	outer_thickness = 10;
 	// screwhole_diameter = 3;
@@ -26,8 +27,8 @@ module NylonTuner() {
 		}
 	}
 	module ear() {
-		rotate([0, 90, 0]) cylinder(h=22.6, d=earshaft_diameter, $fn=cyl_ld_fn);
-		rotate([0, 90, 0]) translate([0,0,22.6-ear_height]) cylinder(h=ear_height, d=ear_diameter, $fn=cyl_hd_fn);
+		rotate([0, 90, 0]) cylinder(h=ear_total_height, d=earshaft_diameter, $fn=cyl_ld_fn);
+		rotate([0, 90, 0]) translate([0,0,ear_total_height-ear_height]) cylinder(h=ear_height, d=ear_diameter, $fn=cyl_hd_fn);
 	}
 
 	// Plate and clearance
@@ -37,7 +38,7 @@ module NylonTuner() {
 		// Peg
 		translate([0, i*peg_spacing + 16, 0]) peg();
 		// Ear
-		translate([plate_width/2, i*peg_spacing + 22.5, -earshaft_diameter/2-2.5]) ear();
+		translate([plate_width/2-1, i*peg_spacing + 22.3, -earshaft_diameter/2-1.5]) ear();
 	}
 	// Mounting holes
 	for (i = [6, 39, 75, 105]) {