420 lines
16 KiB
OpenSCAD
420 lines
16 KiB
OpenSCAD
include <common.scad>
|
||
include <UBassTuner.scad>
|
||
include <NylonTuner.scad>
|
||
|
||
include <CFTubes/common.scad>
|
||
// Choose your material by only including one of the below
|
||
// include <CFTubes/PLA.scad>
|
||
include <CFTubes/PETG.scad>
|
||
|
||
// Guitar_Scale_Length_mm = 610; // millimetres, slightly over 24inch (609.6mm) Jaguar scale, should be fine for guitar and u-bass
|
||
// assert(fret_scale_length(0) == 610); // Make sure the function correctly uses our changed global
|
||
|
||
// Philippians 4:8
|
||
// Gideon (ShinKaiYaku07) 真実な, 尊ぶべき, 正しい, 清い, 愛すべき, 評判の良い, 徳とされる, 称賛に値する
|
||
// ShinKaiYaku65 最後に、兄弟たち。すべての真実なこと、すべての誉れあること、すべての正しいこと、すべてのきよいこと、すべての愛すべきこと、すべての評判の良いこと、そのほか徳と言われること、称賛に値することがあるならば、そのようなことに心を留めなさい。
|
||
// I swapped 愛 and 評判 because 12th fret should be the biggest marker, and having only 15 as a 2char marker would be too disorienting
|
||
// going with 良 for 21
|
||
fret_inlays = [[3, "真"], [5, "尊"], [7, "正"], [9, "清"], [12, "評判"], [15, "愛"], [17, "徳"], [19, "賛"], [21, "良"], [24, "主イエス"]];
|
||
|
||
module neck(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, num_frets=24, fret_width=2.4, filler=false) {
|
||
fw2 = fret_width/2;
|
||
neck_length = fret_scale_length(0)+fw2;
|
||
neck_width = (num_strings-1)*string_spacing + string_margin*2;
|
||
module neck_stock() {
|
||
angle_excess = asin((scallop_depth+fw2)/target_neck_thickness);
|
||
a0 = 90-angle_excess;
|
||
a1 = 270+angle_excess;
|
||
rotate([-90, 0, 0])
|
||
linear_extrude(neck_length)
|
||
polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]); // Ellipse
|
||
}
|
||
module scallop(fret) {
|
||
x0 = fret_scale_length(fret-1) - fw2;
|
||
x1 = fret_scale_length(fret) + fw2;
|
||
xmid = lerp(x0, x1, 0.5);
|
||
// Radius it?
|
||
arc = arc_points([[x0, scallop_depth], [x1, scallop_depth], [xmid, 0]]);
|
||
// echo(arc);
|
||
rotate([90, 0, 90]) linear_extrude(neck_width, center=true) polygon(arc);
|
||
}
|
||
module scallops() {
|
||
for (fret = [0:num_frets]) {
|
||
scallop(fret);
|
||
}
|
||
}
|
||
module fret_bumps() {
|
||
for (fret = [0:num_frets]) {
|
||
translate([0, fret_scale_length(fret), scallop_depth])
|
||
rotate([0, 90]) cylinder(d=fret_width, h = neck_width, center = true, $fn=200);
|
||
}
|
||
}
|
||
module fret_inlays() {
|
||
for (num_text = fret_inlays) {
|
||
fret = num_text[0];
|
||
if (fret <= num_frets) {
|
||
x0 = fret_scale_length(fret-1);
|
||
x1 = fret_scale_length(fret);
|
||
diff = x0 - x1;
|
||
translate([0, lerp(x0, x1, 0.5), -0.5])
|
||
linear_extrude(30)
|
||
text(text = num_text[1], font = JP_Serif_Font, halign = "center", valign = "center", size = clamp(2, diff-fret_width*2-2, 10));
|
||
}
|
||
}
|
||
}
|
||
module fret_side_markers() {
|
||
for (num_text = fret_inlays) {
|
||
fret = num_text[0];
|
||
if (fret <= num_frets) {
|
||
x0 = fret_scale_length(fret-1);
|
||
x1 = fret_scale_length(fret);
|
||
diff = x0 - x1;
|
||
mid = lerp(x0, x1, 0.67);
|
||
rotate([0, -94, 0])
|
||
translate([0, mid, neck_width/2-3])
|
||
linear_extrude(50)
|
||
rotate(-37)
|
||
text(text = str(fret), font = JP_Serif_Font, halign = "right", valign = "center", size = 4.5);
|
||
}
|
||
}
|
||
}
|
||
|
||
if (filler) { // Somewhat placeholder for now
|
||
difference() {
|
||
neck_stock();
|
||
scallop(25);
|
||
translate([-neck_width, 0, scallop_depth]) cube([neck_width*2, Guitar_Scale_Length_mm*3, target_neck_thickness*3]);
|
||
translate([-neck_width, 0, 0]) cube([neck_width*2, (fret_scale_length(25)+fret_scale_length(24))/2, target_neck_thickness*3]);
|
||
}
|
||
} else {
|
||
render() difference() {
|
||
neck_stock();
|
||
scallops();
|
||
scallop(num_frets+1);
|
||
fret_inlays();
|
||
fret_side_markers();
|
||
// Chop off anything above the frets
|
||
translate([-neck_width, 0, scallop_depth]) cube([neck_width*2, Guitar_Scale_Length_mm*3, target_neck_thickness*3]);
|
||
// Reduce rest of the body to 0
|
||
translate([-neck_width, 0, 0]) cube([neck_width*2, (fret_scale_length(num_frets)+fret_scale_length(num_frets+1))/2, target_neck_thickness*3]);
|
||
}
|
||
intersection() {
|
||
fret_bumps();
|
||
neck_stock();
|
||
}
|
||
}
|
||
}
|
||
|
||
module tailpiece(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4*6) {
|
||
fw2 = fret_width/2;
|
||
neck_length = 84;
|
||
neck_width = (num_strings-1)*string_spacing + string_margin*2 + 6 + 6;
|
||
module neck_stock() {
|
||
angle_excess = asin((scallop_depth+fw2)/target_neck_thickness);
|
||
a0 = 90-angle_excess;
|
||
a1 = 270+angle_excess;
|
||
rotate([-90, 0, 0])
|
||
linear_extrude(neck_length)
|
||
polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
|
||
}
|
||
module scallop(fret) {
|
||
x0 = fret_scale_length(fret-1) - fw2;
|
||
x1 = fret_scale_length(fret) + fw2;
|
||
xmid = lerp(x0, x1, 0.5);
|
||
// Radius it?
|
||
arc = arc_points([[x0, scallop_depth], [x1, scallop_depth], [xmid, 0]]);
|
||
// echo(arc);
|
||
rotate([90, 0, 90]) linear_extrude(neck_width, center=true) polygon(arc);
|
||
}
|
||
module fret_bumps() {
|
||
translate([0, neck_length-fw2, scallop_depth]) rotate([0, 90]) cylinder(d=fret_width, h=neck_width, center = true, $fn=200);
|
||
}
|
||
|
||
module differences() {
|
||
t_offset = -30; //2.7;
|
||
t_z = -25; //-23;
|
||
|
||
module tuner() {
|
||
hole_r = 3;
|
||
bend_r = 24 + hole_r + 10;
|
||
fn=72;
|
||
rotate([90, -90, 90]) UBassTuner(from_below=true, from_side=true);
|
||
// translate([35,16,0]) cylinder(h=10-t_z, d=7, $fn=72);
|
||
translate([36-7,7,1]) for (a = [10:89]) {
|
||
hull() {
|
||
translate([a/9, bend_r-bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
|
||
translate([(a+1)/9, bend_r-bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
|
||
translate([7, bend_r-bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
|
||
}
|
||
}
|
||
}
|
||
translate([t_offset, 49, t_z]) tuner();
|
||
mirror([1,0,0]) translate([t_offset, 27, t_z]) tuner();
|
||
translate([t_offset, 5, t_z]) tuner();
|
||
for (i = [-1:2:1])
|
||
translate([i*15, 0, -4])
|
||
CFTubeCutout(neck_length, 0, tolerance=0.4);
|
||
translate([0, 0, -10])
|
||
CFTubeCutout(neck_length, 0, tolerance=0.4);
|
||
}
|
||
thick = 34;
|
||
render() difference() {
|
||
color([1,1,1,0.7]) translate([-neck_width/2, 0, -thick]) round_cube([neck_width, neck_length, thick], 4);
|
||
differences();
|
||
}
|
||
// color([1,1,1,0.3]) neck_stock();
|
||
}
|
||
|
||
module fret_tube(from_fret, to_fret, fret_width=2.4) {
|
||
fw2 = fret_width/2;
|
||
x0 = fret_scale_length(0)+fw2;
|
||
x1 = fret_scale_length(from_fret) + ((from_fret==0) ? fw2 : (-fw2));
|
||
x2 = fret_scale_length(to_fret)-fw2;
|
||
render() difference() {
|
||
neck(fret_width=fret_width);
|
||
for (i = [-1:2:1])
|
||
translate([i*15, 0, -4])
|
||
CFTubeCutout(x1, x2);
|
||
for (i = [-1:2:1])
|
||
translate([i*7.5, 0, -7])
|
||
CFSquareCutout(x1, x2);
|
||
translate([0, 0, -10])
|
||
CFTubeCutout(x1, x2);
|
||
|
||
translate([-50, 0, -50]) cube([100, x2, 100]);
|
||
translate([-50, x1, -50]) cube([100, x0-x1, 100]);
|
||
|
||
// αβγδεζ
|
||
rotate([90, 0, 0]) linear_extrude((x2+0.3)*2, center=true) text(text = "01β", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
|
||
}
|
||
}
|
||
|
||
module fret_tube_filler(from_fret, to_fret, fret_width=2.4, belthole_length=140, VLH=true) {
|
||
fw2 = fret_width/2;
|
||
x0 = fret_scale_length(0)+fw2;
|
||
x1 = fret_scale_length(from_fret) + ((from_fret==0) ? fw2 : (-fw2));
|
||
x2 = (to_fret < 100) ? (fret_scale_length(to_fret)-fw2) : 0;
|
||
render() difference() {
|
||
neck(fret_width=fret_width, filler=true);
|
||
for (i = [-1:1])
|
||
translate([i*15, 0, (i==0)?(-10):(-4)])
|
||
CFTubeCutout(x1, x2, VLH=VLH);
|
||
|
||
translate([-50, 0, -50]) cube([100, x2, 100]);
|
||
translate([-50, x1, -50]) cube([100, x0-x1, 100]);
|
||
|
||
// Add a belt hole
|
||
arc = arc_points([[16, -20], [-16, -20], [0, -4]]);
|
||
belthole_r = 2.5;
|
||
belthole_fn = 72;
|
||
belthole_x0 = x1-belthole_r-5;
|
||
belthole_x1 = belthole_x0 - belthole_length;
|
||
render() for (i = [0:len(arc)-2]) {
|
||
hull() {
|
||
translate([arc[i][0], belthole_x0, arc[i][1]]) sphere(belthole_r, $fn=belthole_fn);
|
||
translate([arc[i+1][0], belthole_x0, arc[i+1][1]]) sphere(belthole_r, $fn=belthole_fn);
|
||
translate([arc[i][0], belthole_x1, arc[i][1]]) sphere(belthole_r, $fn=belthole_fn);
|
||
translate([arc[i+1][0], belthole_x1, arc[i+1][1]]) sphere(belthole_r, $fn=belthole_fn);
|
||
}
|
||
}
|
||
|
||
// αβγδεζ
|
||
t = "01β.β";
|
||
translate([0,0,-3.5]) rotate([90, 0, 0]) linear_extrude((x2+0.3)*2, center=true) text(text = t, font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
|
||
translate([0,x1-0.3,-3]) rotate([90, 0, 180]) linear_extrude((0.3)*2, center=true) text(text = t, font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
|
||
}
|
||
}
|
||
|
||
module headpiece(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4) {
|
||
headpiece_length = 36;
|
||
cf_square_length = 32;
|
||
fw2 = fret_width/2;
|
||
x0 = fret_scale_length(0)+fw2;
|
||
neck_width = (num_strings-1)*string_spacing + string_margin*2;
|
||
bend_radius = 24;
|
||
|
||
module stock() {
|
||
angle_excess = asin(scallop_depth/target_neck_thickness);
|
||
a0 = 90-angle_excess;
|
||
a1 = 270+angle_excess;
|
||
translate([0, x0, 0])
|
||
rotate([-90, 0, 0])
|
||
linear_extrude(headpiece_length)
|
||
polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
|
||
}
|
||
module string_tubes(tolerance = 1.0) {
|
||
string_thicknesses = [4.9, 4.2, 3.0];
|
||
module string_tube(diameter, fn=36) {
|
||
hole_r = diameter/2;
|
||
bend_r = bend_radius + hole_r;
|
||
union() {
|
||
for (a = [0:89]) {
|
||
hull() {
|
||
translate([0, bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
|
||
translate([0, bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
|
||
}
|
||
}
|
||
hull() {
|
||
translate([0, bend_r*sin(90), bend_r*cos(90)]) sphere(hole_r, $fn=fn);
|
||
translate([0, bend_r*sin(90), -target_neck_thickness]) sphere(hole_r, $fn=fn);
|
||
}
|
||
}
|
||
};
|
||
for (i = [0:num_strings-1]) {
|
||
string_diameter = string_thicknesses[i] + tolerance;
|
||
x = -neck_width/2 + string_margin + (i*string_spacing);
|
||
translate([x, x0+2, -bend_radius+scallop_depth]) string_tube(string_diameter);
|
||
}
|
||
}
|
||
difference() {
|
||
stock();
|
||
string_tubes();
|
||
for (i = [-1:2:1])
|
||
translate([i*7.5, 0, -7])
|
||
CFSquareCutout(x0+cf_square_length, x0, taper_x1=false);
|
||
// αβγδεζ
|
||
translate([0, x0+headpiece_length, -5]) rotate([90, 0, 180]) linear_extrude(0.3, center=true) text(text = "01β.γ", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
|
||
}
|
||
}
|
||
|
||
module bridge(string_spacing=18, string_margin=4.5, num_strings=3, target_neck_thickness=15, scallop_depth=3, fret_width=2.4) {
|
||
piece_length = 16;
|
||
cf_square_length = 32;
|
||
fw2 = fret_width/2;
|
||
x0 = 0;
|
||
neck_width = (num_strings-1)*string_spacing + string_margin*2;
|
||
bend_radius = 24;
|
||
string_thicknesses = [4.9, 4.2, 3.0];
|
||
|
||
module stock() {
|
||
angle_excess = asin(scallop_depth/target_neck_thickness);
|
||
a0 = 90-angle_excess;
|
||
a1 = 270+angle_excess;
|
||
translate([0, x0, 0])
|
||
rotate([-90, 0, 0])
|
||
linear_extrude(piece_length)
|
||
polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)]]);
|
||
intersection() {
|
||
r = 14;
|
||
translate([0,8,scallop_depth]) rotate([18, -90, 0]) scale([1,0.2,1]) cylinder(r=r, h=neck_width*1.5, center=true, $fn=72);
|
||
a0 = -90;
|
||
a1 = 90;
|
||
translate([0, x0, 0])
|
||
rotate([-90, 0, 0])
|
||
linear_extrude(piece_length)
|
||
polygon([for (i = [0:300]) let(a=lerp(a0, a1, i/300.0)) [neck_width*0.5*sin(a), -target_neck_thickness*cos(a)*3]]);
|
||
}
|
||
}
|
||
module string_tubes(tolerance = 1.0) {
|
||
module string_tube(diameter, fn=36) {
|
||
hole_r = diameter/2;
|
||
bend_r = bend_radius + hole_r;
|
||
union() {
|
||
for (a = [0:89]) {
|
||
hull() {
|
||
translate([0, bend_r*sin(a), bend_r*cos(a)]) sphere(hole_r, $fn=fn);
|
||
translate([0, bend_r*sin(a+1), bend_r*cos(a+1)]) sphere(hole_r, $fn=fn);
|
||
}
|
||
}
|
||
hull() {
|
||
translate([0, bend_r*sin(90), bend_r*cos(90)]) sphere(hole_r, $fn=fn);
|
||
translate([0, bend_r*sin(90), -target_neck_thickness]) sphere(hole_r, $fn=fn);
|
||
}
|
||
}
|
||
};
|
||
for (i = [0:num_strings-1]) {
|
||
string_diameter = string_thicknesses[i] + tolerance;
|
||
x = -neck_width/2 + string_margin + (i*string_spacing);
|
||
// translate([x, x0+2, -bend_radius+scallop_depth]) string_tube(string_diameter);
|
||
translate([x, 0, scallop_depth+string_diameter/2+8]) rotate([-90,0,0]) cylinder(d=string_diameter, h=20, $fn=72);
|
||
}
|
||
}
|
||
// string_tubes();
|
||
difference() {
|
||
stock();
|
||
string_tubes();
|
||
for (i = [-1:1])
|
||
translate([i*15, 0, (i==0)?(-10):(-4)])
|
||
CFTubeCutout(piece_length+0.1, x0-0.1, VLH=false);
|
||
// αβγδεζ
|
||
translate([0, x0+piece_length, -5]) rotate([90, 0, 180]) linear_extrude(0.3, center=true) text(text = "01β", font = "Deja Vu Sans", halign = "center", valign = "center", size = 4);
|
||
}
|
||
}
|
||
|
||
module Nylon6String() {
|
||
fsl_mm = fret_scale_length(0);
|
||
echo(str("Making a Nylon 6 String with scale length ", fsl_mm, "mm = ", fsl_mm/25.4, "in"))
|
||
assert(fsl_mm == Classical_Short_Scale_mm); // Make sure the function correctly uses our changed global
|
||
|
||
num_frets = 20;
|
||
num_strings = 6;
|
||
// 56mm wide neck
|
||
string_spacing = 10; // 50mm E to e
|
||
string_margin = 3; // +6
|
||
scallop_depth = 2.5;
|
||
target_neck_thickness = 22;
|
||
fret_width=2.4;
|
||
|
||
|
||
// neck(num_frets=num_frets, num_strings=num_strings, string_margin=string_margin, string_spacing=string_spacing);
|
||
module CF_Span(full_length = 700, ply = 3, hole = true) {
|
||
for (i=[0:ply-1])
|
||
translate([0, lerp(0, full_length-CF_Tube_Len, i/(ply-1)), CF_Square_Width*i]) CFSquare(hole=hole);
|
||
}
|
||
// for (m=[0,11]) mirror([m, 0, 0]) color([0.4, 0.5, 0.5]) translate([9, -40, -16]) CF_Span();
|
||
// CFTube();
|
||
// %neck(num_frets=num_frets, num_strings=num_strings, string_margin=string_margin, string_spacing=string_spacing, scallop_depth=scallop_depth, target_neck_thickness=target_neck_thickness);
|
||
module NeckFragment(from_fret, to_fret, to_origin=true, include_from_fret=false) {
|
||
x0 = fret_scale_length(to_fret) - fret_width/2;
|
||
x1 = fret_scale_length(from_fret) + ((include_from_fret)?1:(-1)) * fret_width/2;
|
||
xn = fsl_mm + fret_width;
|
||
translate([0,to_origin ? -x0 : 0,0]) render() difference() {
|
||
neck(num_frets=num_frets, num_strings=num_strings, string_margin=string_margin, string_spacing=string_spacing, scallop_depth=scallop_depth, target_neck_thickness=target_neck_thickness);
|
||
translate([-100, 0, -100]) cube([200, x0, 200]);
|
||
translate([-100, x1, -100]) cube([200, xn-x1, 200]);
|
||
for (m=[0,11]) mirror([m, 0, 0]) color([0.4, 0.5, 0.5]) translate([9, 0, -16+(CF_Square_Width*2)]) CFSquareCutout(x0, x1, taper_length=2);
|
||
translate([ 12,0,-14]) CFSquareCutout(x0, x1, taper_length=2);
|
||
translate([ 12-CF_Square_Width,0,-14]) CFSquareCutout(x0, x1-15, taper_length=2, taper_x2=false);
|
||
translate([-12,0,-14]) CFSquareCutout(x0, x1, taper_length=2);
|
||
translate([-12+CF_Square_Width,0,-14]) CFSquareCutout(x0+15, x1, taper_length=2, taper_x1=false);
|
||
translate([20,0,-6]) CFTubeCutout(x0, x1, taper_length=2);
|
||
}
|
||
}
|
||
difference(){
|
||
NeckFragment(2, 3);
|
||
translate([-20,0,-1]) rotate([-90,180,180]) linear_extrude(3, center=true) text("PETG", size=3.5, halign="center", valign="center");
|
||
translate([-20,0,-6]) rotate([-90,180,180]) linear_extrude(3, center=true) text("1", size=3.5, halign="center", valign="center");
|
||
}
|
||
|
||
// translate([0,0,30]) difference() {
|
||
// neck(num_frets=num_frets, num_strings=num_strings, string_margin=string_margin, string_spacing=string_spacing, scallop_depth=scallop_depth, target_neck_thickness=target_neck_thickness);
|
||
// for (m=[0,11]) mirror([m, 0, 0]) color([0.4, 0.5, 0.5]) translate([9, -40, -16]) CF_Span(hole=false);
|
||
// }
|
||
|
||
// for (m=[0,11]) mirror([m, 0, 0]) translate([29,10,-32]) rotate([0,-90,0]) NylonTuner();
|
||
// Debug markers to aid part slicing eyeballing
|
||
for (i = [150:250:1000]) {
|
||
%translate([50,i,0]) union() {text(str(i, "mm")); cube([50, 1, 1], center=true);}
|
||
}
|
||
}
|
||
|
||
// echo(fret_scale_length(0) - fret_scale_length(8)); // 225.724
|
||
// echo(fret_scale_length(8) - fret_scale_length(24)); // 240.335
|
||
// fret_tube(0, 8);
|
||
// //translate([30, 0, 0])
|
||
// fret_tube(8, 24);
|
||
|
||
// headpiece();
|
||
// UBassTuner();
|
||
|
||
// fret_tube_filler(24, 100);
|
||
// tailpiece();
|
||
// bridge();
|
||
|
||
Guitar_Scale_Length_mm = Classical_Short_Scale_mm;
|
||
Nylon6String();
|
||
|
||
// difference() {
|
||
// translate([-15, -60, 0]) cube([50, 120, 8]);
|
||
// translate([0, 55, 3]) rotate([180,0,0]) NylonTuner();
|
||
// } |